MicroMax II Dispense System
Dispense System for Heated Applications
 |
|---|
 |
Product Sheet (pdf) |
| Standard Features |
| Applications |
| Specifications |
| Series Comparisons |
| Request further details |
The GPD Global MicroMax II is a compact, high accuracy, fluid dispense system that gives you the added flexibility of heat for your process. The frame is “liquid rock” which gives the system a thermally stable platform for accurate and repeatable positioning.
The MicroMax II platform from GPD Global incorporates all of the exceptional performance benefits of the MicroMax with the additional capability of adding heat to your process. Heat is required in many processes to assist in material flow and to eliminate trapped air pockets. The MicroMax II is configurable with multiple heat zones allowing you to sculpt your process. Heat is available in the following areas: Pre-Post Heat, Work-Area, and at the Material and Needle. Maximum temperature for the substrate is 150° C while the material and needle may be heated to 70° C and 90° C respectively.
The MicroMax II, as part of the MAX II Series, incorporates many innovative features making the system easy to use and operator friendly. Some key features are: Automatic X, Y, Z calibration (no operator intervention required), needle cleaner, computer controlled syringe air pressure, Contour Mapping, FLOware operating software and multi valve capability.
Standard Features^
- Compact Footprint
- Unibody Frame
- Functional Workarea 12” x 12” (305 mm x 305 mm)
- Heat Capability
- 2 Valve/Tool Capability
- Up to 36,000 Dots/Hour
- Positioning Accuracy ± 0.001" (± 0,025 mm)
- Linear Speed up to 30 inches/second (762 mm/second)
- Automatic Vision Alignment System (Cognex based) and Pattern Recognition Trainer
- Red/Blue Illuminator
- Needle Cleaner
- Auto Calibration Station for automatic X,Y,Z needle calibration
- Station 1 and 2 Tool-less Taper-Lock Mounting Hardware
- Heat & Vacuum Control Module
- Software-Controlled Syringe Air Pressure
- Easy Programming of dots, lines, fills, arcs, etc. through GPD Global FLOware Operating Software
- TCP/IP Network Ready
Applications^
Click here to view our chart of Fluid Dispense Applications by dispense system.
Specifications^
| Description | Details |
|---|---|
| Configurations | Inline Conveyor System or Stand-alone System |
| Work Area | 12" x 12" (305 mm x 305 mm) |
| Dispense Rate* | 36,000 dots per hour (adhesive) |
| Linear Speed | 30 inches/second (762 mm/sec) |
| Positioning Accuracy** | ±0.001" (± 0,025 mm) |
| Repeatability*** | ±0.0006" (± 0,0152 mm) |
| XYZ Drive | Precision Ball Screw Drive with Linear Rails and closed-loop encoder feedback |
| Valve Stations (maximum) | 2 working valve mounts |
| Footprint | 36.5" W x 47" D x 60" H (93 cm W x 119 cm D x 152 cm H) |
| Weight (approximate) | 2,100 lb (953 kg) |
| More... | More specifications on Product Sheet (pdf) |
| * Based on speed test of 1,000 dot
pattern at 0.050" (1,27 mm) spacing with certain SMT adhesive materials, at 0.020"
(0,508 mm) dot diameter. ** With System Mapping over 12" x 12" (305 mm x 305 mm) dispense area. *** Per axis. |
|
