MicroMax Dispense System
Dispense System for Non-Heated Applications
 |
|---|
 |
Product Sheet (pdf) |
| Standard Features |
| Applications |
| Specifications |
| Series Comparisons |
| Request further details |
MicroMax is a compact, high-throughput conveyorized dispense system for non-heated applications. This dispenser model is ideal for applications such as SMT adhesive, solder paste, conductive epoxies, solder mask, and No Flow Underfill materials.
MicroMax has a small footprint with a width of only 36.5 inches (93 cm)! The work area of 12" x 12" (305 mm x 305 mm) is ideal for pc board manufacturing and boats/carriers.
Combined with our Micro-Dot Valve, its dispense rate is up to 38,000 dots per hour at a speed of up to 30" (762 mm) per second. Combined with our Micro-Dot Valve, a servo-driven valve for small dot dispense, the MicroMax can comfortably achieve 10 mil dots at 3 sigma levels.
Standard Features
- Composite, Unibody Frame
- Small Footprint: Width 36.5" x Depth 47" x Height 60" (927 mm x 1194 mm x 1524 mm)
- Positioning Accuracy ± 0.001" (± 0,025 mm)
- Automatic Vision Alignment System (Cognex based) and Pattern Recognition Trainer
- Red/Blue Illuminator
- Contact Surface Sensor with 0.050" (1,27 mm) Tip and less than 5 grams of force
- Auto Calibration Station for automatic X,Y,Z needle calibration
- Needle Cleaner
- 2 Valve Capability
- Station 1 and 2 Tool-less Taper-Lock Mounting Hardware
- Software-Controlled Syringe Air Pressure
- TCP/IP Network Ready
- Second Internal Hard Drive for Backups
- 4" (102 mm) Ventilation Stack
- LED Interior Lighting
- Interlocked Safety Barriers
- X-Y-Z Brushless Servo Motors with Precision Ball Screws
- Linear Speed up to 30 inches/second (762 mm/second)
- 3-Color Status Light Tower - Red, Amber, Green
- Pentium PC and Color, Flat Panel Monitor
- Easy Programming of dots, lines, fills, arcs, etc. through GPD Global FLOware Operating Software
- Real-Time Editor while system is in production
- Start Up & Leveling Kit
- 1 CD copy of MAX Series Documentation for Installation, Operation, and Maintenance
- CE Declaration of Conformity
- Inline Conveyor System with single position nest conveyor and lifter plate --- ideal for Boat/Carrier and PC Board Transport
- SMEMA compatible
- 12" x 12" (305 mm x 305 mm) Dispense Area including both valve positions and the camera
- Can be configured for stand-alone process work
Applications^
Click here to view our chart of Fluid Dispense Applications by dispense system.
Specifications^
| Description | Details |
|---|---|
| Configurations | Inline Conveyor System or Stand-alone System |
| Work Area | 12" x 12" (305 mm x 305 mm) |
| Dispense Rate* | 38,000 dots per hour (adhesive) |
| Linear Speed | 30 inches/second (762 mm/sec) |
| Positioning Accuracy** | ±0.001" (± 0,025 mm) |
| Repeatability*** | ±0.0006" (± 0,0152 mm) |
| XYZ Drive | Precision Ball Screw Drive with Linear Rails and closed-loop encoder feedback |
| Valve Stations (maximum) | 2 working valve mounts |
| Footprint | 36.5" W x 47" D x 60" H (93 cm W x 119 cm D x 152 cm H) |
| Weight (approximate) | 1,900 lb (862 kg) |
| More... | More specifications on Product Sheet (pdf) |
| * Based on speed test of 1,000 dot
pattern at 0.050" (1,27 mm) spacing with certain SMT adhesive materials, at 0.020"
(0,508 mm) dot diameter. ** With System Mapping over 12" x 12" (305 mm x 305 mm) dispense area. *** Per axis. |
|
